Nord-Lock Group Om Nord-Lock Nord-Lock Original Washers | Product information

NORD-LOCK® ORGINAL BRICKOR

ProduKTinformation

Ta reda på allt du behöver veta om våra originalbrickor, från materialspecifikationer till vägledning om hur du väljer rätt produkt för din applikation.

Nord-Lock Steel Washers
Applications	General steel applications
Material standard	EN 1.7182
Size range	M3-M130 #5 to 5"
Corrosion resistance	Minimum 1,000 hours in salt spray test (according to ISO 9227)
Hardening	Through hardened
Washer hardness*	≥ 465HV1
Coating	Delta Protekt® KL100 zinc flake coating
Bolt grades	Up to 12.9
Temperature range***	-50°C to 200°C
Product designation	NL NLsp
Laser marking type code	flZn

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

*** Temperature recommendations are based on information from the raw material supplier and testing. The locking function is not affected within the specified range.

Nord-Lock Stainless Steel Washers
Applications	General stainless steel applications
Material standard	EN 1.4404
Size range	M3-M80 #5 to 3 1/8"
Corrosion resistance	PREN 27**
Hardening	Surface hardened
Washer hardness*	≥ 520HV0,05
Bolt grades	Up to A4-80
Temperature range***	-160°C to 500°C
Product designation	NLss NLspss
Laser marking type code	SS

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Nord-Lock 254 SMO® Washers
Applications	Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing
Material standard	EN 1.4547
Size range	M3-M39 #5 to 1 1/2"
Corrosion resistance	PREN 45**
Hardening	Surface hardened
Washer hardness*	≥ 600HV0,05
Temperature range***	-160°C to 500°C
Product designation	NLss-254 NLspss-254
Laser marking type code	254

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Nord-Lock Alloy C-276 Washers
Applications	Acidic environment – chemical industry, evaporators, offshore, downhole tooling
Material standard	EN 2.4819 or equivalent
Size range	M4-M20 #8 to 1 1/2"
Corrosion resistance	PREN 68**
Hardening	Surface hardened
Washer hardness*	≥ 520HV0,05
Temperature range***	-160°C to 500°C
Product designation	NLss-276 NLspss-276
Laser marking type code	276

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Nord-Lock Alloy 718 Washers
Applications	High temperatures – gas turbines, turbo charges, incinerators
Material standard	EN 2.4668 or equivalent
Size range	M4-M20 #5 to 1 1/2"
Corrosion resistance	PREN 29**
Hardening	Surface hardened
Washer hardness*	≥ 620HV0,05
Temperature range***	-160°C to 700°C
Product designation	NLss-718 NLspss-718
Laser marketing type code	718

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

All types of Nord-Lock washers
Material type
Steel	Stainless steel (ss)	254 SMO®	ALLOY C-276	ALLOY 718
Applications
General steel applications	General stainless steel applications	Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing	Acidic environment – chemical industry, evaporators, offshore, downhole tooling	High temperatures – gas turbines, turbo charges, incinerators
Material standard
EN 1.7182	EN 1.4404	EN 1.4547	EN 2.4819 or equivalent	EN 2.4668 or equivalent
Size range
M3-M130 #5 to 5"	M3-M80 #5 to 3 1/8"	M3-M39 #5 to 1 1/2"	M4-M20 #8 to 1 1/2"	M4-M20 #5 to 1 1/2"
Corrosion resistance
Minimum 1,000 hours in salt spray test (according to ISO 9227)	PREN 27**	PREN 45**	PREN 68**	PREN 29**
Hardening
Through hardened	Surface hardened	Surface hardened	Surface hardened	Surface hardened
Washer hardness*
≥ 465HV1	≥ 520HV0,05	≥ 600HV0,05	≥ 520HV0,05	≥ 620HV0,05
Coating
Delta Protekt® KL100 zinc flake coating	-	-	-	-
Bolt grades
Up to 12.9	Up to A4-80	Up to A4-80	Up to A4-80	Up to A4-80
Temperature range***
-50°C to 200°C	-160°C to 500°C	-160°C to 500°C	-160°C to 500°C	-160°C to 700°C
Product designation
NL NLsp	NLss NLspss	NLss-254 NLspss-254	NLss-276 NLspss-276	NLss-718 NLspss-718
Laser marking type code
flZn	SS	254	276	718

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Selection guide

Application parameter
Steel	Stainless steel (ss)	254 SMO®	ALLOY C-276	ALLOY 718
Steel type
EN 1.7182	EN 1.4404	EN 1.4547	EN 2.4819 or equivalent	EN 2.4668 or equivalent
Examples of applications
General steel applications	General stainless steel applications. Non chlorine / acid environments	General salt water applications, pumps, chloride applications, heat exchangers, nuclear, desalination, food processing & medical equipment	General acidic environments, process and chemical industry, evaporators, offshore downhole tooling	Applications with high temperatures, gas turbines, turbo charges, incinerators
Available for bolt sizes
M3-M130 #5 to 5"	M3-M80 #5 to 3 1/8"	M3-M39 #5 to 1 1/2"	M3-M39 available on request #5 to 1 1/2" available on request	M3-M39 available on request #5 to 1 1/2" available on request
Washer types
Regular outer diameter (NL3 - NL130) Enlarged outer diameter (NL3,5sp - NL36sp)	Regular outer diameter (NL3ss-NL80ss) Enlarged outer diameter (NL3,5spss - NL30spss)	Regular outer diameter (NL3ss-254 - NL39ss-254) Enlarged outer diameter (NL3,5spss-254 - NL27spss-254)	Regular outer diameter (NL3ss-276 - NL39ss-276) Enlarged outer diameter (NL3,5spss-276 - NL27spss-276)	Regular outer diameter (NL3ss-718 - NL39ss-718) Enlarged outer diameter (NL3,5spss-718 - NL27spss-718)
Treatment surface coating
Through hardened Delta Protekt® base coat (KL100) and top coat (VH302GZ)	Surface hardened	Surface hardened	Surface hardened	Surface hardened
Washer hardness*
≥ 465HV1	≥ 520HV0,05	≥ 600HV0,05	≥ 520HV0,05	≥ 620HV0,05
Corrosion resistance
Minimum 1,000 hours in salt spray test (according to IS09227)	PREN 27**	PREN 45**	PREN 68**	PREN 29**
Bolt grades
Up to 12.9	Up to A4-80
Temperature range***
-50°C to 200°C	-160°C to 500°C	-160°C to 500°C	-160°C to 500°C	-160°C to 700°C

* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.

** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Hardness Conversion Table

Vickers HV	Brinell HB	Rockwell HRC	Rockwell HRA	8.8 bolt	10.9 bolt	12.9 bolt
300	285	29,8	65,5	\|
310	295	31,0	65,8	\|
320	304	32,2	66,4	\|	320 HV
330	314	33,3	67,0	\|	\|
335	319	33,9	67,3	335 HV	\|
340	325	34,4	67,6		\|
350	333	35,5	68,1		\|
360	342	36,6	68,7		\|
370	352	37,7	69,2		\|
380	361	38,8	69,8		380 HV
385	366	39,3	70,1			385 HV
390	371	39,8	70,3			\|
400	380	40,8	70,8			\|
410	390	41,8	71,4			\|
420	399	42,7	71,8			\|
430	409	43,6	72,3			\|
435	414	44,1	72,5			435 HV
440	418	44,5	72,8
460	437	46,1	73,6
480	(456)	47,7	74,5
500	(475)	49,1	75,3
520	(494)	50,5	76,1
540	(513)	51,7	76,7

Låsbrickor för alla applikationer

Med killåsningstekniken som grund uppfyller våra brickor kraven i alla branscher och applikationer där säkra skruvförband är avgörande.

CAD-FILER

Ladda ner de CAD-filer du behöver för dina Nord-Lock produkter, kompatibla med en mängd olika CAD-program.

Beräkna åtdragningsmoment

Använd vårt verktyg och våra riktlinjer för att hitta rätt åtdragningsmoment och förspänning.

MANUALER OCH DOKUMENT

Få tillgång till alla dokument du kan behöva, från tekniska guider till användarmanualer.

LIVSTIDSGARANTI

Upptäck fördelarna med en livstidsgaranti som garanterar prestanda i varje steg av din resa mot säkra skruvförband.

Upptäck våra killåsningsbrickor idag

Är du redo att utforska våra låsbrickor? Eller är du intresserad av en offert? Eller både och? Gör ditt val nedan och skriv in din e-postadress.

Begär samples Begär offert

För att läsa mer om hur vi hanterar dina personuppgifter, vänligen se vårPrivacy Policy .

Tack för att du kontaktar oss! Håll utkik i din inbox, en av våra kollegor kommer att kontakta dig via email inom kort.

Select your country

Latin America
Australia
Brazil
China - 中国
France
Germany
India
Italy
Japan - 日本
Korea - 대한민국
Switzerland (DE)
- Schweiz
- Suisse
- Svizzera
Switzerland (FR)
Switzerland (IT)
Sweden
Spain
United Kingdom
United States
Global
Southeast Asia