Oryginalne podkładki Nord-Lock

Oryginalne podkładki Nord-Lock

Firma Nord-Lock stworzyła oryginalną technologię rozwiązań klinujących do zabezpieczania połączeń śrubowych nawet pod działaniem silnych wibracji i obciążeń dynamicznych. Efekt klina wytwarzany pomiędzy łbem śruby a nakrętką sprawia, że połączenie śrubowe nie może odkręcić się samoczynnie.

NORD-LOCK STEEL WASHERS

Applications General steel applications
Material standard EN 1.7182
Size range Regular outer diameter M3-M130, #5 to 5"
Enlarged outer diameter M3.5-M36, #6 to 1 3/8"
Corrosion resistance Minimum 1,000 hours in salt spray test (according to ISO 9227)
Hardening Through hardened
Washer hardness* ≥ 465HV1
Coating Basecoat Delta Protekt® KL100, Topcoat VH 302 GZ 
Standard products in range M6-M24 are available with Delta Seal GZ Black top coat (SP items not included)
Bolt grades Up to 12.9
Temperature range*** -50°C to 200°C
Product designation NL
NLsp
Laser marking type code Traceable batch number and type code flZn

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

NORD-LOCK STAINLESS STEEL WASHERS

Applications General stainless steel applications. Non chlorine / acid environments
Material standard EN 1.4404
Size range Regular outer diameter M3-M80, #5 to 3 1/8"
Enlarged outer diameter M3.5-M30, #6 to 1 1/8"
Corrosion resistance PREN 27**
Hardening Surface hardened
Washer hardness* ≥ 520HV0,05
Bolt grades Up to A4-80
Temperature range*** -160°C to 500°C
Product designation NLss
NLspss
Laser marking type code SS

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

** Corrosion resistance is known as PREN. PREN, or Pitting Resistance Equivalent Number, is a theoretical number calculated from the chemical composition of the raw material. The formula is: PREN = %Cr + 3.3x%Mo + 16x%N.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

NORD-LOCK 254 SMO® WASHERS

Applications General salt water applications, pumps, chloride applications, heat exchangers, nuclear, desalination, food processing & medical equipment
Material standard EN 1.4547
Size range Regular outer diameter M3-M39, #5 to 1 1/2"
Enlarged outer diameter M3.5-M27, #6-1"
Corrosion resistance PREN 45**
Hardening Surface hardened
Washer hardness* ≥ 600HV0,05
Temperature range*** -160°C to 500°C
Product designation NLss-254
NLspss-254
Laser marking type code 254

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

** Corrosion resistance is known as PREN. PREN, or Pitting Resistance Equivalent Number, is a theoretical number calculated from the chemical composition of the raw material. The formula is: PREN = %Cr + 3.3x%Mo + 16x%N.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

 

Nord-Lock Alloy C-276 Washers

Applications General acidic environments, process and chemical industry, evaporators, offshore downhole tooling
Material standard EN 2.4819 or equivalent
Size range Regular outer diameter M4-M20, #8 to 5/8"
Enlarged outer diameter M8-M12, 5/16"
Corrosion resistance PREN 68**
Hardening Surface hardened
Washer hardness* ≥ 520HV0,05
Temperature range*** -160°C to 500°C
Product designation NLss-276
NLspss-276
Laser marking type code 276

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

** Corrosion resistance is known as PREN. PREN, or Pitting Resistance Equivalent Number, is a theoretical number calculated from the chemical composition of the raw material. The formula is: PREN = %Cr + 3.3x%Mo + 16x%N.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Nord-Lock Alloy 718 Washers

Applications Applications with high temperatures, gas turbines, turbo charges, incinerators
Material standard EN 2.4668 or equivalent
Size range Regular outer diameter M4-M20, #8 to 3/4"
Enlarged outer diameter M8-M12, 5/16"
Corrosion resistance PREN 29**
Hardening Surface hardened
Washer hardness* ≥ 620HV0,05
Temperature range*** -160°C to 700°C
Product designation NLss-718
NLspss-718
Laser marking type code 718

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

** Corrosion resistance is known as PREN. PREN, or Pitting Resistance Equivalent Number, is a theoretical number calculated from the chemical composition of the raw material. The formula is: PREN = %Cr + 3.3x%Mo + 16x%N.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

All types of Nord-Lock washers

Material type
Steel Stainless
steel (ss)
254 SMO® ALLOY C-276 ALLOY 718
Applications
General steel applications General stainless steel applications. Non chlorine / acid environments General salt water applications, pumps, chloride applications, heat exchangers, nuclear, desalination, food processing & medical equipment General acidic environments, process and chemical industry, evaporators, offshore downhole tooling Applications with high temperatures, gas turbines, turbo charges, incinerators
Material standard
EN 1.7182 EN 1.4404 EN 1.4547 EN 2.4819 or equivalent EN 2.4668 or equivalent
Size range

Regular outer diameter M3-M130, #5 to 5"
Enlarged outer diameter M3.5-M36, #6 to 1 3/8"

Regular outer diameter M3-M80, #5 to 3 1/8"
Enlarged outer diameter M3.5-M30, #6 to 1 1/8"

Regular outer diameter M3-M39, #5 to 1 1/2"
Enlarged outer diameter M3.5-M27, #6-1"

Regular outer diameter M4-M20, #8 to 5/8"
Enlarged outer diameter M8-M12, 5/16"

Regular outer diameter M4-M20, #8 to 3/4"
Enlarged outer diameter M8-M12, 5/16"

Corrosion resistance
Minimum 1,000 hours in salt spray test (according to ISO 9227) PREN 27** PREN 45** PREN 68** PREN 29**
Hardening
Through hardened Surface hardened Surface hardened Surface hardened Surface hardened
Washer hardness*
≥ 465HV1 ≥ 520HV0,05 ≥ 600HV0,05 ≥ 520HV0,05 ≥ 620HV0,05
Coating
Delta Protekt® KL100 zinc flake coating - - - -
Bolt grades
Up to 12.9 Up to A4-80      
Temperature range***
-50°C to 200°C -160°C to 500°C -160°C to 500°C -160°C to 500°C -160°C to 700°C
Product designation
NL
NLsp
NLss
NLspss
NLss-254
NLspss-254
NLss-276
NLspss-276
NLss-718
NLspss-718
Laser marking type code
flZn SS 254 276 718

* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.

** Corrosion resistance is known as PREN. PREN, or Pitting Resistance Equivalent Number, is a theoretical number calculated from the chemical composition of the raw material. The formula is: PREN = %Cr + 3.3x%Mo + 16x%N.

*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.

Przewodnik po materiałach

Parametr techniczny
Stal Podkładka ze stali nierdzewnej (ss) 254 SMO® ALLOY
C-276
ALLOY
718
Stal type
EN 1.7182  EN 1.4404  EN 1.4547  EN 2.4819 lub równorzędny EN 2.4668 lub równorzędny
Przykłady zastosowania
Urządzenia i konstrukcje stalowe ogólnego  przeznaczenia i zastosowania Urządzenia i konstrukcje ze stali nierdzewnej   ogólnego przeznaczenia i zastosowania z wyłączeniem środowiska kwasów i chloru Urządzenia i konstrukcje ze stali nierdzewnej   przeznaczone do pracy ze słona wodą (m.in.  pompy, wymienniki ciepła, maszyny spożywcze) Urządzenia i konstrukcje ze stali nierdzewnej   przeznaczone do pracy w warunkach zwiększonych procesów korozyjnych (przemysł chemiczny i przetwórczy, morski wydobywczy) Urządzenia i konstrukcje ze stali nierdzewnej przeznaczone do pracy w wysokich temperaturach (n.p. turbiny gazowe)
Dostępne dla śrub o wymiarach

M3-M130

#5 - 5"

M3-M80

#5 - 3 1/8"

M3-M39

#5 - 1 1/2"

M3-M39 Dostępne na życzenie

#5 - 1 1/2" Dostępne na życzenie

M3-M39 Dostępne na życzenie

#5 - 1 1/2" Dostępne na życzenie

Typy podkładek

Standardowa średnica zewnętrzna (NL3 - NL130)

Powiększona średnica zewnętrzna (NL3,5sp - NL36sp)

Standardowa średnica zewnętrzna (NL3ss - NL80ss)

Powiększona średnica zewnętrzna (NL3,5spss - NL30spss)

Standardowa średnica zewnętrzna (NL3ss-254 - NL39ss-254)

Powiększona średnica zewnętrzna (NL3,5spss-254 - NL27spss-254)

Standardowa średnica zewnętrzna (NL3ss-276 - NL39ss-276)

Powiększona średnica zewnętrzna (NL3,5spss-276 - NL27spss-276)

Standardowa średnica zewnętrzna (NL3ss-718 - NL39ss-718)

Powiększona średnica zewnętrzna (NL3,5spss-718 - NL27spss-718)

Obróbka cieplna/ Obróbka powierzchniowa
Hartowanie na wskrośDelta Protekt® warstwa bazowa (KL100) i warstwa nawierzchniowa (VH302GZ) Utwardzanie powierzchniowe Utwardzanie powierzchniowe Utwardzanie powierzchniowe Utwardzanie powierzchniowe
Twardość*
≥ 465HV1 ≥ 520HV0,05 ≥ 600HV0,05 ≥ 520HV0,05 ≥ 620HV0,05
Odporność na korozję
Minimum 1,000 godzin testu mgły solnej(zgodnie z ISO 9227) PREN 27** PREN 45** PREN 68** PREN 29**
Klasa śruby
Do 12.9 włącznie Do A4-80 włącznie      
Zakres temperatur***
od -50°C do 200°C od -160°C do 500°C od -160°C do 500°C od -160°C do 500°C od -160°C do 700°C

 

* Aby system działał prawidłowo twardość elementów łączących i łączonych musi być mniejsza od twardości podkładek Nord-Lock (patrz tabela).

**PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Dane w tabeli dotyczą materiału podstawowego.

***Zakresy temperatur określone na podstawie informacji od  dostawcy materiału. W podanych zakresach funkcja blokująca podkładek nie zmienia się.

Twardość podkładek

Aby unikalny system klinujący Nord-Lock działał prawidłowo, twardość elementów łączących i łączonych musi być mniejsza od twardości podkładek Nord-Lock.


Typ podkładki Zakres Ocynk płatkowy flZnnc-600 Brak pokrycia
Podkładka stalowa (Hartowanie na wskroś) NL3 - NL42 NL45 - NL130 ≥ 465 HV1
≥ 465 HV1
 
 Podkładka nierdzewna (Surface hardened) NL3ss - NL80ss   ≥ 520 HV0.05
SMO 254® washers NL3ss-254 - NL80ss-254   ≥ 600 HV0.05

 

Tabela przeliczeniowa skal twardości

Vickers HV Brinell HB Rockwell HRC Rockwell HRA śruba klasy 8.8 śruba klasy 10.9 śruba klasy 12.9
300 285 29,8 65,5 |    
310 295 31,0 65,8 |    
320 304 32,2 66,4 | 320 HV  
330 314 33,3 67,0 | |  
335 319 33,9 67,3 335 HV |  
340 325 34,4 67,6   |  
350 333 35,5 68,1   |  
360 342 36,6 68,7   |  
370 352 37,7 69,2   |  
380 361 38,8 69,8   380 HV  
385 366 39,3 70,1     385 HV
390 371 39,8 70,3     |
400 380 40,8 70,8     |
410 390 41,8 71,4     |
420 399 42,7 71,8     |
430 409 43,6 72,3     |
435 414 44,1 72,5     435 HV
440 418 44,5 72,8      
460 437 46,1 73,6      
480 (456) 47,7 74,5      
500 (475) 49,1 75,3      
520 (494) 50,5 76,1      
540 (513) 51,7 76,7      

Sukcesy naszych klientów